ManagementMania AppMania EduMania JobMania BusinessPages


Plug the D-link wireless range extender into a power socket. Make sure to place the extender within the wifi signal range of the home router or AP or connect it the router’s existing wired network. Switch on the D-link range extender to receive power supply. Allow the status LED to blink amber light indicating receiving of power. Go to the wireless settings/utility section on your computer and select to open it. Select the wireless network name (SSID) field of the D-link wifi extender’s network from displayed wifi networks list. Enter the wireless network password for the selected SSID above. The wireless network settings – SSD and password could be located from the included Wi-Fi Configuration Card of the D-link extender. Launch a web browser on your computer connected to wifi network of the D-link wifi extender’s network. Navigate to D-link extender login domain address http://dlinkap.local or dlinkrouter.local in from the address bar. Either use default IP login http://192.168.0.50 for d-link extender login instead of dlinkrouter.local. As the D-link extender login page gets directed, enter the D-link extender login information in the given fields. Key in the dlink extender login default username as Admin. Also, to key in the dlink extender default password, leave it blank.
Did this article help you?
Rating:
Author: Dlinkap. local | Created at: 09.07.2021

Comments



To enter the discussion you must be signed in

Sign in


Related consulting companiesmore...